Concrete repair and leveling done right the first time
Dallas sits on the Blackland Prairie, and that ground is heavy clay. The clay swells when the rain rolls in and shrinks through the long summer drought. Your concrete rides right on top of it. So a driveway can sink on one side, a patio can lift at a corner, and a walkway can split straight down the middle. We see this every week across Dallas and nearby towns like Garland, Irving, Mesquite, and Grand Prairie. Some slabs drop a full inch. Others tilt just enough to pool water against the house. When your concrete moves, we find out why it moved first. Then we bring it back to level and seal the cracks so water stops working its way underneath.
We start by reading the whole slab, not just the broken spot you called about. Where is it sinking? Has the soil below washed out? Is a downspout dumping roof water right at the edge? Once we know the cause, we pick the right fix. We handle slabs of every size, from a single sunken porch step to a whole driveway that has dropped away from the garage. For a sunken slab we drill a set of small ports and pump a dense foam underneath. The foam spreads into the empty space, fills it, and lifts the concrete back to grade in a single visit. The ports are patched when we finish, so the repair stays low and clean. For cracks we clean them out and fill them so they hold and stay closed. Where a joint has opened up, we reset it so the edges meet flush again. Most repairs wrap up the same day, and you can walk on the surface within hours. Cars can usually roll back on soon after that, and the yard is left the way we found it.
- We lift sunken driveways, patios, porches, and walkways back to grade with injected foam, so the ledge that catches feet and tires is gone.
- We seal the cracks and joints that let Dallas rain pour in and wash the soil out from under your slab.
- We track down the real cause first, from a washed out base to a downspout aimed at the wrong spot, so the sinking does not just come back.
- Most jobs finish in one visit, the raised surface is ready to use the same day, and there is no big tear out to clean up after.
- We save your existing concrete instead of ripping it out, which means less mess in your yard and a faster, cleaner fix.
Leveling beats replacing when the concrete itself is still solid. Tearing out a slab and pouring a new one takes several days, and the fresh pour still has to cure before you can use it. Foam lifting works in hours and puts far less strain on your yard and your week. We tell you straight which path fits your slab. If the concrete is cracked all the way through and crumbling, we say so, and we walk you through a clean new pour instead. We do not sell you a lift that will not last. You get a clear read on the slab, an honest plan, and a firm date on the calendar. No runaround, no vague maybe.
If a slab at your Dallas home or business is sinking, cracking, or catching feet, reach out. We will look it over, tell you what it really needs, and get your concrete back to level fast.